London, 4 January 2017 – Technics has today unveiled the new Grand Class SB-G90 Speaker System. Building on the linear-phase, point- sound-source concept, this system reproduces a vast sound field in excellent clarity and precision with realism over a wide range, from low to super-high frequencies
Unwanted vibration thoroughly eliminated to achieve clear sound imaging
Balanced Driver Mounting Architecture
Equipped with a newly developed Balanced Driver Mounting Architecture, the speaker unit is mounted to a sub-baffle installed inside the cabinet at the speaker unit‘s centre of gravity, which suppresses the vibration of the speaker unit itself. Also, because the speaker unit is not mounted to the baffle on the front, transmission of unwanted vibration from the speaker unit to the baffle can be suppressed.
This makes it possible to reduce distortion in the sound waves generated from the diaphragm and reduce unwanted vibration sound from the baffle. As a result, the speaker can reproduce a sound field excellent in sound imaging with both realism and clarity, allowing visualisation of the fine details of each and every sound.
High Rigidity Cabinet
Cabinet strength is ensured inside the cabinet by using a cross construction with sub-baffles, to which the speaker units are mounted, and horizontal reinforcing panels. A separate sub-baffle is used for each speaker unit, which minimises the effect of mutual vibration between speaker units.
High response achieved by a newly developed coaxial unit
Point Sound Source Speaker System
When reproducing sound with full spatial expression, ideally the wave-fronts emitted from the speaker units are aligned at any listening position, i.e. providing a point sound source.
While inheriting the linear phase concept, the SB-G90 has newly developed two-way coaxial cone units (including mid-range and tweeter) targeting high-speed reproduction with enhanced high sensitivity.
Wide Range & Low Distortion Reproduction
In order to fully reproduce the vast frequency spectrum in high-resolution music sources, the SB-G90 uses both a newly developed 25-mm phase precision tweeter and two newly developed 16-cm low-distortion, long-stroke woofers, achieving reproduction in a wide frequency range of 27 Hz to 100 kHz.
In addition, the diaphragm material of all the speaker units is made of anodized aluminium in order to unify the tones over the entire frequency range.
Also, all the speaker units have features such as copper rings and high-linearity-drive voice coils, thereby achieving low distortion over a wide frequency range. These characteristics enable smooth and well-balanced music reproduction.
Phase Precision Driver (Coaxial 2-Way Speaker Unit)
A lightweight, high-rigidity aluminium dome diaphragm on which anodizing has been performed is used for the diaphragm of the tweeter. The driver achieves reproduction of a wide frequency range up to 100 kHz by using a new dome shape optimized through simulation, as well as achieving greater uniformity in phase characteristics by using a phase plug.
In addition, the SB-G90 uses high-linearity-drive underhung voice coils, the magnetic gaps of which have had magnetic fluid injected to suppress temperature rise, thereby ensuring superior power linearity. These features provide reproduction of the high-frequency range with superb detail and beauty.
As with the tweeter, the mid-range also uses an anodized, lightweight, high-rigidity aluminium cone diaphragm. The magnetic circuit achieves low distortion and enhanced drive power by using large magnets, copper caps, and high-linearity-drive underhung voice coils.
Also, the SB-G90’s frame uses a tough die-cast in a support structure with arms dispersing resonance, thereby thoroughly eliminating even the slightest unnecessary resonant sound. These features enable reproduction of mid-range with excellent precision and response.
Low-frequency reproduction with excellent response and low distortion
16cm Low Distortion Long Stroke Woofer
The 16cm Low Distortion Long Stroke Woofer woofers have features such as double magnets producing robust drive power, and the magnetic circuit with high-linearity-drive overhung voice coils, copper rings, aluminium short rings, and this newly developed long-stroke unit achieves low-frequency reproduction with wide dynamic range as well as excellent low distortion and response even for a large amplitude.
Also, the frame uses a tough die-cast in a support structure that disperses resonance, thereby thoroughly eliminating even the slightest unnecessary resonant sound. A lightweight, high-rigidity aluminium cone diaphragm on which anodizing has been performed is used for the diaphragm to ensure uniformity in tone with the mid-range and high frequencies. These features reproduce robust, powerful bass.
Emotive Acoustic Technology
- Balanced Driver Mounting Architecture
- Point Sound Source Speaker System
- Wide Range & Low Distortion Reproduction
- Phase Precision Driver (Coaxial 2-way Speaker Unit)
- 16-cm Low Distortion Long Stroke Woofer
- High Rigidity Cabinet • High Quality Network Circuit
Technics Definitive Design
- Black High Gloss Finish
- Magnet Fixed Fabric Grille
Dimension (W x H x D)
- 302 x 1114 x 375 mm *Including Net and Terminals with Spike
- Approx. 32kg /pc
- 3-Way 4 Speakers Bass Reflex
*Including Coaxial 2-Way for Midrange and Tweeter
- Speaker Unit:
Woofer: 16cm Cone Type x2
Midrange/Tweeter: Coaxial, 16cm Cone Type x1 / 2.5cm Dome Type x1
- Crossover Frequencies: 480Hz, 3.2kHz • Frequency Range: 27Hz - 100kHz (-16dB), 32Hz - 85kHz (-10dB)
- Sound Pressure Level: 88dB /2.83V (m)
- Impedance: 4Ω
- Input power (IEC): 100W (Rated), 200W (Max)
- Recommended Amp. Power: 40-150W (Rated)